About Corbin Corbin Core Seating Dies The Core Seat Die (CS-1) can be used to make a semi-wadcutter style (shoulder between nose and shank) bullet, or to push the lead core into a jacket in preparation for the ogive forming operation in a... Jacketed Bullets Lead Bullets Precision Dies
New Product Info NEW PRODUCT INFO Swaging Info on CD-ROM : Complete website, documents, prices... ET-2-S Jacket Trim Die : Trim jackets to desired length CSP-1LH Long Handle : More Power for the S-Press! DC-1015 Bulle... Bullet Swaging Jacketed Bullets Precision Dies
Corbin Bullet Swaging Infographics Bullets can be made from copper strip and lead wire, using this equipment (for flat base open tip or lead tip bullets):CSP-1 S-PressJMK-1-S jacket maker kitFJFB-3-S 3-die set (open tip)-OR-LTFB-4-S 4-... Bullet Swaging Jacketed Bullets Lead Bullets Precision Dies
About Corbin Adjustable-Length Jacket Trim Die The Corbin ET-2-R jacket trimming die, for use in slotted ram RCBS-type reloading presses, uses a tapered punch to expand the trimmed ring so is very lightly attached to the jacket where it can be fli... Jacketed Bullets Precision Dies
About Corbin Powder Metal Tools Corbin Powder Metal Tools: Powder Funnel Assembly The "Precision Funnel" solves the problem of how to accurately place a column of powdered metal into a bullet jacket, when the column of uncompressed ... Jacketed Bullets Precision Dies
Press Release New 38/9mm .50-In. Jackets PRESS RELEASE: FOR IMMEDIATE RELEASE White City, OR. A new, thin-wall bullet jacket made to meet the demand for a high-expansion, medium to low velocity bullet in the heavier weights for .38, 9mm, .38... Jacketed Bullets
About Corbin Quick-Change Punch Holder An accessory for the Corbin CSP-1 (Series II) Swaging Press, allows for the rapid insertion and removal of components longer than 1 inch. Typically, a bullet jacket or copper tubing section that is fr... Bullet Swaging Jacketed Bullets Precision Dies
About Corbin Tubing Jacket Makers Copper Tubing Jacket Makers Type -S Jacket Makers Type -H Jacket Makers All Corbin swage presses can make bullet jackets from copper tubing. The CSP-1 (S-Press) can build calibers from .22 to .458 up ... Bullet Swaging Jacketed Bullets
About Corbin S-Press Long Handle The CSP-1LH long handle is an option available for the S-Press to increase the leverage. It reduces the effort of such operations as jacket drawing from copper strip, or forming jackets from copper tu... Jacketed Bullets
Jacket Making with 1-in or 5/8-in x .030 Strip The following table shows the maximum length for a given wall thickness and caliber which can be drawn from either 1.0-in x .030 strip, or .625 (5/8-in) x .030 strip. The stages of turning the strip i... Jacketed Bullets
About Corbin Bullet Jacket Making Kit The Corbin JMK-1-S Jacket Making Kit, for use with the Corbin S-Press, makes precision bullet jackets in .452 caliber, which can then be redrawn to other calibers and trimmed to length by adding a JRD... Jacketed Bullets Precision Dies
Bullet Jacket List Precision Bullet Jackets Cat.No. Caliber Length Quantity (Click chart for prices) J-22-705 244/5.56mm .705-in 500 J-22-70B 244/5.56mm .705-in Box/4500 J-22-70C 244/5.56mm .705-in Carton/9000 J-22-800 ... Jacketed Bullets Precision Dies