About Corbin Standard Ejection Pin Sizes Each caliber of point forming die uses a standard diameter for the ejection pin wire, based on suitable strength to resist bending and to avoid penetration of the lead core, by spreading normal ejecti... Lead Bullets Precision Dies
Making Light-Weight Bullets Very light weight bullets normally lose balance and alignment, and are not accurate. But you can make normal length bullets with very light weights, and shift the balance forward to regain accuracy. F... Bullet Swaging
About Corbin 50 BMG Primer Tool A new primer tool for the 50 BMG cartridge is now available from Corbin Manufacturing. The tool fits into the ram of any Corbin press that takes the type -H dies ( CSP-2 Mega-Mite, and CHP-1 Corbin Hy... Precision Dies
Free Swaging Documents On-Line Corbin Manufacturing has set up a new, dedicated file server to provide free, instantly available technical documents, images, e-books, instruction manuals, and other illustrated/printed materials abo... Bullet Swaging
How To Swage Bullets Step By Step Lead SWC bullets The most basic bullet is a lead semi-wadcutter style. The nose can be any shape, so long as there is a .015-.020 inch shoulder between the nose and the shank. This kind of bullet is f... Bullet Swaging Lead Bullets
About Corbin CSP-B Bench Stand Discontinued item - shown for reference purposes The CSP-B Bench Stand places your CSP-1 S-Press (or earlier Series II press) at a better position for swaging than mounting it directly on a typical re... Bullet Swaging
Turning Ideas Into Income Do you have an idea pertaining to a better bullet design? -Or a new idea for any kind of product or improvement in the firearms industry? Would you like to turn that idea into income, and avoid the pi... Bullet Swaging Precision Dies
How To Make Powder Metal Bullets Corbin has temporarily discontinued the offer of EZ-FLOW(tm) tungsten powder with 1% accra-wax coating on the grains, due to the high current price for tungsten. We provide Atomized Copper powder with... Bullet Swaging DIY Projects
About Corbin Corbin Core Seating Dies The Core Seat Die (CS-1) can be used to make a semi-wadcutter style (shoulder between nose and shank) bullet, or to push the lead core into a jacket in preparation for the ogive forming operation in a... Jacketed Bullets Lead Bullets Precision Dies
About Corbin Arbor Press Adapters Get TRIPLE duty from your S-Press or older Series II press: Bullet Swaging Benchrest precision reloading Adjustable stroke Arbor Press The CSP-A Arbor Press Adapter kit consists of a set of two precis... Bullet Swaging Precision Dies
About Corbin Press Adapter Bushings The CSP-1 S-press has a 7/8-in x 14 tpi (threads per inch) head, and does not accept larger bushings. It can be used directly, as it comes, for reloading with standard 7/8-14 dies as well as bullet sw... Precision Dies
About Corbin Early CM-3 and CM-4 Core Moulds Early CM-3 and CM-4 Core Moulds See current CM-4a Core Mould See Price list E-mail: dave@corbins.com The CM-3 was built in .312, .340, .365, .390, .430, .500, .600, .700 and custom diameters. The CM-4... Bullet Swaging Precision Dies