About Corbin's Lead Tip Forming Die The Lead Tip Forming die (LT-1) is similar in appearance to the core seating die (CS-1) except for these two features: The lead tip die has a larger diameter cavity, to accept the finished bullet. The... Lead Bullets Precision Dies
About Corbin Bullet Balls Bullet Balls are precise diameter and weight polymer balls, available in five color-coded diameters, which can be used to make lighter-weight bullets by taking up some of the volume within a bullet ja... Bullet Swaging Precision Dies
Corbin Internal Punch Synchronization Guide PF-1-S or PF-1-H Point Forming Dies normally have a spring wire ejector that is retracted from the die cavity, and does not contact the bullet during swaging. It pushes the bullet out of the die on th... Bullet Swaging Precision Dies
About Corbin High BC (ULD) Bullet Tips Corbin ULD bullet tips give you the maximum BC for a given caliber and weight of Ultra Low Drag bullet. The tough metal tips are held securely in place as the ogive is formed, forcing the core to flo... Bullet Swaging Precision Dies
About corbin Pro-Swage Die The Pro-Swage system utilizes a special reloading press die (7/8-14 tpi) with punches that fit into a normal RCBS slotted ram. The die comes with one standard base and one standard nose punch. It can ... Bullet Swaging Precision Dies
About Corbin DC-1003 Paper Patch Designer Software The DC-1003 paper patch bullet design program has four sections, each reached from the main menu window. These are: Bullet diameter calculations. Bullet weight calculations. Two-Part Bullet calculatio... Bullet Swaging Precision Dies
About Corbin CSP-2 Press Rod Extensions The CSP-2EXT press rod extension kit adds another three inches of "daylight" or total space between the base of the press, and the position of the press head. This additional height does not change th... Bullet Swaging Precision Dies
About Corbin CSP-2SH Side Roller-Bar Press Handle The CSP-2SH Side Roller-Bar Handle for the CSP-2 Mega-Mite press is now shipped as standard on current presses, and is also available as an option for presses shipped with the earlier high-torque "lon... Bullet Swaging Precision Dies
About Corbin CSP-2LH Long Handle The CSP-2LH long handle for the Mega Mite press provides about twice the leverage as the side roller-bar handle, with a trade-off in the length of reach required for each stroke. This handle is recomm... Bullet Swaging Precision Dies
About Corbin Point Form Die Ejection Pins The Point Form Die (PF-1) puts the ogive curve on a lead or jacketed bullet. It is used after the core has been seated in the core seating die, which in turn is used after the core has been swaged to ... Bullet Swaging Jacketed Bullets Lead Bullets Precision Dies
About Corbin JRD-1-R, JRD-1-S and JRD-1-H Jacket Reducing Dies Corbin builds the JRD-1 and JRD-2 jacket reducing die sets, each in type -S (for the 5/8-24 ram S press with 7/8-14 die threads) and in type -H (for the 1.0-12 ram H press with 1.5-12 die threads). In... Jacketed Bullets Precision Dies
Dave Corbin Favorite Handguns Over the years, everyone who enjoys handguns gathers a few that have some special appeal. Unfortunately, the appeal sometimes becomes apparent long after the gun has been traded or sold. Here are a fe... Bullet Swaging Precision Dies