How do you swage bullets? Bullet swaging is a method of using pressure to form a bullet, which is the inert metal portion of the cartridge (which becomes a projectile when fired) by using pressure to flow the materials at room...
About Corbin's Lead Tip Forming Die The Lead Tip Forming die (LT-1) is similar in appearance to the core seating die (CS-1) except for these two features: The lead tip die has a larger diameter cavity, to accept the finished bullet. The...
Copper Strip Jacket Production Calculations The following is a chart of production output for a given material input (that is, how many bullets or jackets you can make with a certain number of pounds of copper strip, lead wire, etc.). Naturally...
What Is Bullet Swaging? “Swaging” is the process of forming projectiles—specifically bullets, not loaded cartridges—by using high pressure at room temperature to mold materials within a diamond-lapped, high-precision die. No... Bullet Swaging DIY Projects Diamond-lapped Dies High Pressure Jacketed Bullets Lead Bullets Precision Dies
About Corbin Bullet Balls Bullet Balls are precise diameter and weight polymer balls, available in five color-coded diameters, which can be used to make lighter-weight bullets by taking up some of the volume within a bullet ja...
About Corbin Ceramic Heat Treatment Blocks Corbin Manufacturing now offers easily-machinable ceramic foam heat treatment blocks, to make jacket and bullet holders for bonding cores and heat treating jackets. The new blocks are available both a...
About Corbin High BC (ULD) Bullet Tips Corbin ULD bullet tips give you the maximum BC for a given caliber and weight of Ultra Low Drag bullet. The tough metal tips are held securely in place as the ogive is formed, forcing the core to flo...
About corbin Pro-Swage Die The Pro-Swage system utilizes a special reloading press die (7/8-14 tpi) with punches that fit into a normal RCBS slotted ram. The die comes with one standard base and one standard nose punch. It can ...
About Corbin Gas Check Maker Kits Corbin GCM-1 Gas Check Maker Kits are available in -H type (Hydro-Press or CSP-2 Megamite press) and -S type (CSP-1 S-press). They will not work in a standard reloading press. The kits produce high qu...
About Corbin CSP-2SH Side Roller-Bar Press Handle The CSP-2SH Side Roller-Bar Handle for the CSP-2 Mega-Mite press is now shipped as standard on current presses, and is also available as an option for presses shipped with the earlier high-torque "lon...
About Corbin CSP-2LH Long Handle The CSP-2LH long handle for the Mega Mite press provides about twice the leverage as the side roller-bar handle, with a trade-off in the length of reach required for each stroke. This handle is recomm...
About Corbin Point Form Die Ejection Pins The Point Form Die (PF-1) puts the ogive curve on a lead or jacketed bullet. It is used after the core has been seated in the core seating die, which in turn is used after the core has been swaged to ...